logo_bianco
foto sistema DWS

DWS

The DWS (Distance Warning System) monitors the distance between the operator and the machine. It allows customized operating zones to be created, each with dedicated functions, for safer and more efficient work management.

DWS Functions

DISTANCE WARNING

DWS-concetto-1-1

DISTANCE WARNING

Monitors the distance between operator and machine, and activates an audible and/or visual warning on the radio remote control or the machine when a preset threshold is exceeded.

START-UP INTERLOCK

DWS-concetto-2-2

START-UP INTERLOCK

Allows the machine to be started only when the radio remote control is within a specified distance. Once the machine has been started, the radio remote control can be used without distance limitations.

COMMAND ENABLEMENT

DWS-concetto-3-3

COMMAND ENABLEMENT

Enables the controls only when the radio remote control is within a preset distance from the machine.

 

DWS Composition

foto-grafica DWS-DWA (1)

DWA

The DWA anchor is a fixed unit installed on the machine. Multiple DWA nodes can be used on the machine unit, up to a maximum of five. 

Thanks to its compact size and a design similar to a small receiving unit (base station), the DWA can be installed and handled without any special precautions, including during servicing or aftermarket retrofit activities.

foto-grafica DWS-DWT

DWT

The DWT tag is an electronic board integrated directly into the transmitting unit (remote station). This ensures operational reliability and protects the device from the elements under normal operating conditions.

DWS Technical Data

 

Supply voltage (DWA)

12/24 V (7-33 V range)

Maximum current consumption (DWA)

200 mA

Protection rating (DWA)

IP65

 UWB frequency

 approx. 6-8.5 GHz range

Certifications and compliance

RED Directive (2014/53/EU)

Interface connectors

M12

Maximum operating range

recommended < 25 m (may exceed 50 m with direct line of sight)

Distance measurement accuracy

under static conditions, variations within +/-10 cm; offset zeroing available

Digital outputs

6 PNP outputs

Configuration via CAN

CANopen parameters and digital output functions

Dimensions

 102×140×50 mm

Weight

 350 g

Mounting

2 screws and/or 4 magnets

Compatible Products

Request more information