Cable control regular size including 4 digital outputs, a fieldbus output (CANopen), 4 digital inputs and a removable start key switch.

Waist belt
Shoulder harness

4.3'' color display
2.7’’ transflective display
High-Efficiency LED panel
Customizable 32-LED matrix
10 or 19-pin cable
Cable Gland
Multi-pin plug
M12 connectors

With the new cable console you can take advantage of an additional benefit. It comes with a red “push” button that, thanks to its own characteristics and appropriate wiring, can have its safety circuits integrated in the machine. This allows the button to be used as either a [STOP] or an [EMERGENCY STOP] button. “STOP” is defined as a function that allows the machine to stop only in safe conditions, whereas an “emergency stop”(once activated) provides a stop to hazardous activities of a machine in the event of an emergency. The button used in the cable control unit can perform either a [STOP] or [EMERGENCY STOP] function, as it conforms to international standards and regulations that govern such as: ISO EN 13850, EN / IEC 60947-5-1, EN / IEC 60947- 5-5 and Directive LVD 2006/95/CE. When used as an [EMERGENCY STOP], the push-button, which carries a load up to 3 A/ 30 VDC, in addition to being red in color also has a yellow background and is indicated with the words "E-STOP" or "EMERGENCY STOP". How to use this button is a choice based on the application requirements and risk analysis of the machine.

Technical data

Power supply
8-30 VDC
Max number of outputs
4 digital
Rated current of digital outputs
2 A (30 VDC)
Safety performance of the STOP function (EN ISO 13849-1)
up to PL e, cat.4
Number of digital input
Protection degree
IP 65 (NEMA 4)
260x200x190 mm
10.2x7.9x7.5 in
2 kg
4.4 lb